[1]Wertz, J. R. and Larson, W. J., Space Mission Analysis and Design, 3rd Edition Torrance, California Dordrecht; Boston: Microcosm; Kluwer, 1999.
[2]Humble, R., Henry, G. N. and Larson, W. J., Space Propulsion Analysis and Design, Department of Defense and United States, National Aeronautics and Space Administration (NASA), 1st Edition, New York: McGraw-Hill, 1995.
[3]Sutton, G. P. and Biblarz, O., Rocket Propulsion Elements, 8th Edition Hoboken, N. J.: Wiley, 2010.
[4]Huzel, D. K., Huang, D. H. and Arbit, H. Modern Engineering for Design of Liquid-Propellant Rocket Engines, Washington, DC: American Institute of Aeronautics and Astronautics, 1992.
[5]Goebel, D. M. and Katz, I., Fundamentals of Electric Propulsion: ion and Hall Thrusters, Hoboken, N.J.: John Wiley & Sons, 2008.
[6]Czysz, P. A. and Bruno, C., Future Spacecraft Propulsion Systems: Enabling Technologies for Space Exploration, 2nd Edition, Berlin ; New York Chichester, UK: Springer ; Published in Association with Praxis Publishing, 2009.
[7]Turner, M. J. L. Rocket and Spacecraft Propulsion: Principles, Practice and New Developments, 3rd Edition, Berlin; Chichester: Springer Published in Association with Praxis Publishing, 2009.
[8]Cornelisse, J. W., Schöyer, H. F. R. and Wakker, K. F. Rocket Propulsion and Space Flight Dynamics, London; San Francisco: Pitman, 1979.
[9]Brown, C. D. Spacecraft Propulsion, Washington, DC: American Institute of Aeronautics and Astronautics, 1996.
[10]Larson,W., Kirkpatrick, Sellers, D. J., Thomas, L. and Verma, D., LSC Applied Space Systems Engineering (Space Technology Series), McGraw-Hill Education, 2009.
[11]Systems Engineering Handbook,United States. National Aeronautics and Space Administration. (Rev.1. ed.), 2007 Available, [on line]: http://purl. fdlp.gov/GPO/gpo13042
[12]Steve, H., "Launch Vehicle and Spacecraft System Design Using the Pistonless Pump," Space 2004 Conference and Exhibit, American Institute of Aeronautics and Astronautics, 2004.
[13]Erichsen, P., "A Quick-Look Analysis Tool for the Impulse Performance of Spacecraft Propulsion Systems,"Presented at the 2ndEuropean Conference for Aerospace Sciences (EUCASS), Brussels, Belgium, 2007.
[14]Juergen, M., "Thruster Options for Microspacecraft - A Review and Evaluation of Existing Hardware and Emerging Technologies," Presented at the 33rd Joint Propulsion Conference and Exhibit, Seattle, WA, 1997.
[15]Wiley, S., Dommer, K. and Mosher, L. "Design and Development of the MESSENGER Propulsion System," American Institute of Aeronautics and Astronautics/Society of Automotive Engineers/ American Society of Mechanical Engineers Joint Propulsion Conference, Huntsville, 2003.
[16]Nosratollahi, M. and Adami-Dehkordi, A. H. "Multidisciplinary Conceptual Design Optimization of Monopropellant Propulsion System of Nanosatellite," Journal of Space Science and Technology (JSST), Vol. 3, No. 3 and 4, Fall-Winter 2010-2011, p. 20 (In Persian).
[17]Smith, P., McLellan, R. and Gibbon, D. "SmallSat Propulsion," Small Satellites for Earth Observation: Selected Proceedings of the 5th International Symposium of the International Academy of Astronautics, Berlin, April 2005, p. 319.
[18]Benfield, M. P. and Turner, M. W. "Spacecraft Propulsion System Impacts When Incorporating Advanced Chemical Propulsion System Technologies," Presented at the NASA Science Technology Conference, University of Maryland, 2007.
[19] Bauer, J., "Mechanical, Power, and Thermal Subsystem Design for a CubeSat Mission," Worcester Polytechnic Institute, 2012.
[20]Matteo, F., "ESA Simulation Libraries, Based on Ecosim Pro,for Modelling Spacecraft and Launch Vehicle Propulsion Systems," Conference of European Space Propulsion System Simulation, Madrid, 2010.
[21]Kunz, O., Renk, T. and Kauffmann, J. "FLPP: Cryogenic Upper Stage Technologies Programmatic and Technological Overview," Presented at the 59th International Astronautical Congress, Glasgow, 2008.
[22]Erichsen, P. "Performance Evaluation of Spacecraft Propulsion Systems in Relation to Mission Impulse Requirements," European Spacecraft Propulsion Conference, 1997, p. 189.
[23]Mosher, L. E. and Wiley, S. "Design, Development and Flight of the NEAR Propulsion System," Johns Hopkins APL Technical Digest, Vol. 19, No. 2, 1998, pp. 175- 184.
[24]Young, D. A. An Innovative Methodology for Allocating Reliability and Cost in a Lunar Exploration Architecture, Georgia Institute of Technology, 2007.
[25]Roskam, J., Airplane Design: Part 8-Airplane Cost Estimation: Design, Development, Manufacturing and Operating, Darcorporation, 1985.
[26]Medvedev, A. A., Space Transportation System Design: Moscow, Mashinostroenie, 2009 (In Rusian).
[27]Mirshams, M., Karimi, H. and Naseh, H. "Multi-Stage Liquid Propellant Launch Vehicle Conceptual Design, Based on Combinatorial Optimization of Major Design Parameters," Journal of Space Science and Technology (JSST), Vol. 1, No. 1, Fall 2008, pp. 21-36 (In Persian).
[28]Mirshams, M., Karimi, H. and Naseh, H. "Multi-Stage Liquid Propellant Launch Vehicle Conceptual Design (LVCD) Software, Based on Multi-Parameter Optimization Idea," Journal of Space Science and Technology (JSST), Vol. 1, No. 2, Winter 2009, pp.17-26 (In Persian).
[29]O.J. Haidn, Advanced Rocket Engines, Advances on Propulsion Technology for High-Speed Aircraft, NATO Science and Technology Organization, Belgium, 2007.
[30]Mirshams, M., Naseh, H., Taei, and Fazeley, H. R., "Liquid Propellant Engine Conceptual Design by Using a Fuzzy-Multi-Objective Genetic Algorithm (MOGA) Optimization Method," Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, February 7, 2014.
[31]Yang, V., Liquid Rocket Thrust Chambers - Aspects of Modeling, Analysis, and Design - Progress in Astronautics and Aeronautics, Vol. 200 American Institute of Aeronautics and Astronautics, 2004.
[32]M. Dobrovolsky, Liquid Rocket Engines, Publishing Mechanical Engineering, Moscow, Mashinostroeni, 1968 (In Russian).
[33]Sutton, G. P., History of Liquid Propellant Rocket Engines: American Institute of Aeronautics and Astronautics, 2006.
[34]C.D. Kurpatenkov, The Calculation of Profile of the Nozzle with a Break Forming, 1975 (In Russian).
[35]Rao, G. V. R. "Exhaust Nozzle Contour for Optimum Thrust," Journal of Jet Propulsion, Vol. 28, No. 6, 1958, pp. 377-382.
[36]Childs, W., Horowitz, T. R., Jenisch,W. M. and Sugarman, B. "Design for Pressurization System Evaluation Liquid Propulsion Rocket Engines," National Aeronautics and Space Administration, California, 1962.
[37]Mirshams, M., Naseh, H. and Fazeley, H. R. "Multi-Objective Multidisciplinary Design of Space Launch System Using Holistic Concurrent Design," Aerospace Science and Technology, Vol. 33, Issue 1, 2014, pp. 40-54.
[38]Wagner, W. A., Liquid Rocket Metal Tanks and Tank Components, National Aeronautics and Space Administration (NASA), 1974, p. 156.
[39]Villeneuve, F. A Method for Concept and Technology Exploration of Aerospace Architectures, Georgia Institute of Technology, 2007.
[40]DMT-600, Available, [on line]: http:// www. astronautix.com/engines/dmt600.htm.