@article { author = {Ghaderi-Dehkordi, Y.}, title = {Investigation of the Effect of Reinforcement on Thermo-Physical Properties of Ablative Heat Shields}, journal = {Space Science and Technology}, volume = {3}, number = {1}, pages = {55-65}, year = {2010}, publisher = {Iranian Aerospace Society -Aerospace Research Institute}, issn = {2008-4560}, eissn = {2423-4516}, doi = {}, abstract = {In the present study, in order to choose the suitable heat shields a comprehensive investigation was performed. Therefore, different properties of each type of heat shields including ablative and thermo-physical properties were measured separately. Finally, the obtained properties were compared. The studied heat shields are phenolic resin composite reinforced by ceramic, asbestos AAA and C cloths. The experimental investigations consist of oxyacetylene standard flame test, specific heat capacity, thermal analysis and thermal conductivity. In addition, in order to compare the thermal efficiency of mentioned heat shields, the temperature on the back surface of each sample subjected to constant heat flux was measured. The results showed that the specimen with 8 mm thickness reinforced with ceramic cloth, which was subjected to 2500 kW.m-2, reduced the temperature from 1550 to 100oC. Therefore, the phenolic composite containing ceramic cloth is the best option.}, keywords = {ablative,thermo,Physical,phenolic,Asbestos AAA and C,Ceramic}, title_fa = {بررسی اثر نوع تقویت‌کننده بر خواص حرارتی عایق‌های فداشونده}, abstract_fa = {در این مقاله به منظور انتخاب یک عایق مناسب از بین چند گزینة موجود مطالعات و بررسی‌های آزمایشگاهی گسترده‌ای صورت گرفته است. بدین منظور خواص و پارامترهای اصلی مشخصة عملکرد هر عایق با آزمایش اندازه‌گیری و در نهایت مقایسه شده‌اند. ویژگی‌های اندازه‌گیری شده شامل خاصیت فداشوندگی و خواص گرمایی- فیزیکی است. عایق‌های مورد بررسی کامپوزیت‌های فنولی (رزول) تقویت شده با سه نوع الیاف مختلف شامل الیاف آزبست AAA، Cو سرامیکی هستند.آزمون‌های انجام شده در این پژوهش شامل تست شعله اکسی استیلن، آزمون اندازه‌گیری ظرفیت حرارتی ویژه، آزمون اندازه‌گیری درجة حرارت در ضخامت عایق، آزمون رفتار تخریب حرارتی و گرمای فداشدن است. همچنین به‌منظور مقایسة عملکرد حرارتی کامپوزیت‌های مذکور، تست تعیین توزیع دمای پشت نمونه‌ها تحت شار حرارتی یکسان نیز انجام گرفت. نتایج آزمایش‌ها نشان داد که عایق با ضخامت 8 میلی‌متر، تهیه شده با الیاف سرامیکی با کاهش دما از 1550 به کمتر از 100 درجة سانتی‌گراد در شار حرارتی kW.m-2 2500 بهترین گزینه برای استفاده است.}, keywords_fa = {فداشوندگی,خواص گرمایی,فیزیکی,فنولی,آزبست AAA و C,سرامیک}, url = {https://jsst.ias.ir/article_14401.html}, eprint = {https://jsst.ias.ir/article_14401_1f9915c3f00570148c71fa8f1896a6d6.pdf} }