@article { author = {Ommi, Fathollah and Poorrajab Sufinai, Dooman and Doomiri Ganji, Davood and Moosavi, Seyed Hossein}, title = {Prediction of droplet size and velocity distribution based on maximum entropy formulation by nonlinear instability analysis of liquid sheet spray and turbulent of nozzle flow}, journal = {Space Science and Technology}, volume = {13}, number = {1}, pages = {1-11}, year = {2020}, publisher = {Iranian Aerospace Society -Aerospace Research Institute}, issn = {2008-4560}, eissn = {2423-4516}, doi = {10.30699/jsst.2020.1122}, abstract = {In this research, it is attempted to determine the diameter and velocity distribution according to the flow characteristics of the upstream and without needing experimental measurements.Firstly, Fluent software has been used to simulate the turbulent flow of inside nozzle by k-? model to obtain the nozzle turbulence energy at the nozzle outlet. Then, nonlinear growth rate analysis of instability is used to determine spray breakup length and the frequency of maximum instability and the mean diameter of primary breakup. Four equation maximum entropy model has been developed according to the inlet of upstream flow. Subsequently, the terms of momentum source as well as the energy of maximum entropy model has been determined using the results of simulated nozzle turbulence flow and instability analysis. In the following, first the results of maximum entropy model have been evaluated with the experimental input and then determined with upstream input. The obtained results which have been compared with experimental tests show well agreement.}, keywords = {k-ε Simulation,Diameter distribution,Non-Linear instability Analysis,Maximum Entropy}, title_fa = {تخمین توزیع قطر و سرعت اسپری به روش ماکزیمم انتروپی با استفاده از تحلیل غیر خطی ناپایداری و شبیه‌سازی توربولانس جریان بالا دست}, abstract_fa = {در این تحقیق سعی شده با توجه به مشخصات جریان بالادست و بدون نیاز به اندازه‌گیری تجربی، توزیع قطر و سرعت تعیین -گردد. در ابتدا با استفاده از نرم افزار فلوئنت، جریان توربولانس داخل نازل به وسیله مدل دو معادله‌ای k-ε شبیه‌سازی شده و انرژی توربولانس نازل در خروجی نازل تعیین می‌گردد، سپس با استفاده از تحلیل رشد غیرخطی اغتشاشات طول شکست افشانه و فرکانس حداکثر ناپایداری تعیین گشته و در نتیجه آن قطر میانگین شکست اولیه تعیین می‌گردد. همچنین مدل ماکزیمم انتروپی چهارمعادله‌ای با توجه به ورودی جریان بالادست توسعه یافته و در ادامه ترم‌های چشمه ممنتوم و انرژی مدل ماکزیمم انتروپی با استفاده ازنتایج شبیه‌سازی جریان توربولانس نازل و تحلیل ناپایداری تعیین می‌گردد. در ادامه نتایج مدل ماکزیمم انتروپی ابتدا با ورودی‌های تجربی ارزیابی شده و سپس نتایج مدل با ورودی جریان بالادست تعیین می‌گردد. این نتایج نیز با نتایج تجربی مقایسه گردیده که همخوانی مناسبی را نشان می‌دهد}, keywords_fa = {شبیه‌سازی دو معادله‌ای,توزیع قطر,تحلیل غیرخطی‌ناپایداری,ماکزیمم انتروپی}, url = {https://jsst.ias.ir/article_86063.html}, eprint = {https://jsst.ias.ir/article_86063_710d561da144ba88a5b2cffc2ab15313.pdf} }