Document Type : Research Paper

Authors

1 Faculty of New Science and Technologies, University of Tehran, Tehran, Iran

2 Faculty of New Science and Technologies, University of Tehran, and Iranian Space Research Center ,Tehran, Iran

Abstract

In this research, to investigate the effects of uncertainties on the natural frequency of satellite system attributed to the variation of layout components, the optimal layout of the satellite is performed utilizing particle swarm optimization (PSO) algorithm, considering stability and geometrical constraints. In order to produce random samples, enough number of results will be extracted, which are mass center of components, and based on the outputs, the finite element modeling of different samples by considering mass point is carried out. After modal analysis, mass and stiffness matrices are extracted, the simulation of Monte - Carlo runs based on Wishart random matrix theory and the eigenvalues of the matrix, i.e. natural frequencies, are obtained. Probabilistic distribution of natural frequencies is shown that in the proposed layout, the distribution of samples is very low and the variation of natural frequency is robust to the proposed optimal location.

Keywords

Main Subjects

[1] Barrientos, F.A., I.Y., Tumer and D.G., Ullman, Design Teams, Complex Systems and Uncertainty, 2007.
[2] Malak Jr RJ and C.J. Paredis, Modeling Design Concepts under Risk and Uncertainty Using Parameterized Efficient Sets. SAE International Journal of Materials and Manufacturing. Vol. 1, No. 1, 2009, pp. 339-52.
[3] Ferebee M.J. and C.L. Allen, “Optimization of Payload Placement on Arbitrary Spacecraft,” Journal of Spacecraft and Rockets, Vol. 28, No. 5, 1991, pp. 612-4.
[4] Boissonnat, J.D., E., de Lange and M. Teillaud, “Slicing Minkowski sums for satellite antenna layout,” Computer-Aided Design, Vol. 30, No. 4, 1998, pp. 255-65.
[5] Yishou, W., T. Hongfei, “Knowledge Fusion Design Method: Satellite Module Layout,” Chinese Journal of Aeronautics, Vol. 22, No. 1, 2009, pp. 32-42.
[6] Fakoor, M., Taghinezhad M. “Layout and Configuration Design for a Satellite with Variable Mass Using Hybrid Optimization Method, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Vol. 230, No. 2, 2016, pp. 360-77.
[7] Fakoor, M., M., Taghinejad and A. Kosari, “Review of Method for Optimal Layout of Satellite Components,” Modares Mechanical Engineering, Vol. 13, No. 9, 2013, pp. 126-37.
[8] Sun, Z., H., Teng, Z. Liu, “Several Key Problems in Automatic Layout Design of Spacecraft Modules,” Progress in Natural Science, Vol.13, No. 11, 2003, pp. 801-8.
[9] Qian, Z.Q., H.F., Teng and Z.G. Sun, “Human-computer Interactive Genetic Algorithm and Its Application to Constrained Layout Optimization,” Chinese Journal of Computers-Chinese Edition, Vol. 24, 5, 2001, pp. 553-9.
[10] Peer, S.K., D.K. Sharma, “Human–computer Interaction Design with Multi-Goal Facilities Layout Model,” Computers & Mathematics with Applications, Vol. 56, No.9, 56, 2008, pp. 2164-74.
[11] Huo, J.Z., H.F. Teng, “Optimal Layout Design of a Satellite Module using a Coevolutionary Method with Heuristic Rules,” Journal of Aerospace Engineering, Vol. 22, No. 2, 2009, pp. 101-11.
[12] Chen, Y., H.F. Teng, “Coevolutionary Algorithm with Coarse-to-Fine Grain Strategy and Its Application to Layout Design of Satellite Module.” Journal of Dalian University of Technology, Vol. 6, 2010.
[13] Xu, Y. C., F.M. Dong, Y. Liu, R.B. Xiao and M. Amos, “Ant Colony Algorithm for the Weighted Item Layout Optimization Problem,” arXiv preprint arXiv:1001.4099. 2010.
[14] Teng, H.F., Y., Chen, W., Zeng, Y.J., Shi and Q.H. Hu, “A Dual-system Variable-Grain Cooperative Coevolutionary Algorithm: Satellite-Module Layout Design.” IEEE Transactions on Evolutionary Computation, Vol. 14, No.3, 2009, pp. 438-55.
[15] Fakoor, M., M. Taghinezhad, A. Kosari and M. Mohamadzade, “Layout Design Optimization of Communication Satellite According to Functional Constraints,” The 21th Annual International Conference on Mechanical Engineering, Iran, Tehran 2013.
[16] Qin, Z. and Y.G. Liang, "A Study on the Particle Swarm Optimization with Adaptive Weight Constrained Layout Optimization.,” The 8th International Conference on Intelligent Human-Machine Systems and Cybernetics (IHMSC)IEEE, Vol. 1, 2016, pp. 283-287.
[17] Li, Z., Y. Zeng, Y. Wang, L. Wang and B. Song, “A Hybrid Multi-Mechanism Optimization Approach for the Payload Packing Design of a Satellite Module,” Applied Soft Computin,, Vol. 45, 2016, pp. 11-26.
[18] Yang, J., X. Chen and W. Yao, “A Rectangular Cuboid Satellite Module Layouts Method Based on Integer Optimization,” The 6th International Conference on Advanced Design and Manufacturing Engineering (ICADME 2016), Atlantis Press 2017.
[19] Liu, J.F. and L. Hao, G. Li, Y. Xue, Z.X. Liu and J. Huang, “Multi-objective Layout Optimization of a Satellite Module Using The Wang-Landau Sampling Method with Local Search,” Frontiers of Information Technology & Electronic Engineering, Vol. 17, No. 6, 2016, pp. 527-542.
[20] Daneshjou, K., M. Arjomandi and H. Shahrabi, “FARAGAM Algorithm in Satellite Layout,” Proceeding 6th Asia-Pacific Conference on Multilateral Cooperation in Space Technology and Applications, 2001.
[21] Fakoor, M., S.M., Ghoreishi and H. Sabaghzadeh, “Spacecraft Component Adaptive Layout Environment (SCALE): an Efficient Optimization Tool,” Advances in Space Research. Vol.58, No. 9, 2016, pp. 1654-1670.
[22] Qin, Z., Y.G., Liang and J.P., Zhou, “An Optimization Tool For Satellite Equipment Layout,” Advances In Space Research, Vol. 61, No. 1, 2018, pp. 223-34.
[23] Jun, T.  and E. Feng, The Global Optimal Solution to the Three-Dimensional Layout Optimization Model with Behavioral Constraints,” Journal of Applied Mathematics and Computing, Vol. 15, No. 1-2, 2004, pp. 313-21.
[24] Cuco, A.P., F.L. de Sousa and A. J. Neto, “A Multi-Objective Methodology for Spacecraft Equipment Layouts,” Optimization and Engineering, Vol. 16, No. 1, 2015, pp. 165-81.
[25] Lau, V., F. Luis de Sousa, R. Luiz and et. al., “A Multidisciplinary Design Optimization Tool for Spacecraft Equipment Layout Conception,” Journal of Aerospace Technology and Management, Vol. 6, No. 4, 2014, pp. 431-46.
[26] Chen, X., W. Yao, Y. Zhao, X. Chen and X. Zheng, “A Practical Satellite Layout Optimization Design Approach Based on Enhanced Finite-Circle Method,” Structural and Multidisciplinary Optimization, Vol. 58, No. 6, 2018, pp. 2635-53.
[27] Fakoor, M., P.M., Zadeh and H.M. Eskandari, “Developing an Optimal Layout Design of a Satellite System by Considering Natural Frequency and Attitude Control Constraints,” Aerospace Science and Technology, Vol. 71, 2017, pp. 172-88.
[28] Chen, X., S. Liu, T. Sheng, Y. Zhao, W. Yao. “The Satellite Layout Optimization Design Approach for Minimizing The Residual Magnetic Flux Density of Micro-and Nano-Satellites,” Acta Astronautica, 2018.
[29] Kim, J., J.C. Yoon and B.S. Kang, “Finite Element Analysis and Modeling of Structure with Bolted Joints,” Applied Mathematical Modelling, Vol. 31, No. 5, 2007, pp. 895-911.
[30] Adhikari, S., M.I. Friswell, K. Lonkar and A. Sarkar, “Experimental Case Studies for Uncertainty Quantification in Structural Dynamics,” Probabilistic Engineering Mechanics, Vol. 24, No. 4, pp.473-92.
[31] Adhikari, S., “Uncertainty Propagation in Linear Systems: an Exact Solution Using Random Matrix Theory, In 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2007 Apr, p. 1957.
[32] Adhikari, S., A. Sarkar, “Uncertainty in Structural Dynamics: Experimental Validation of a Wishart Random Matrix Model,” Journal of Sound And Vibration, Vol. 323, No. 3-5, 2009, pp. 802-25.
[33] Adhikari, S., “Wishart random matrices in probabilistic structural mechanics,” Journal of engineering mechanics,  2008, No. 134, Vol. 12, pp.1029-44.
[34] Adhikari, S., “Generalized Wishart Distribution for Probabilistic Structural Dynamics,” Computational Mechanics, Vol. 45, No. 5, pp. 495-511.
[35] Ley, W., K. Wittmann and W. Hallmann, editors. Handbook of Space Technology, John Wiley & Sons, 2009.