Authors
Abstract
The NAVSTAR Global Positioning System (GPS) is a satellite-based navigation and positioning system which includes a constellation of 32 satellites, remote control stations and its receivers and can be used for determination the geographical positions of its users. GPS signal simulator needs for test and verification of GPS receiver's performances in special applications at the Laboratory. For this mission we should simulate the various static and dynamic scenarios for GPS receiver tracks and generate GPS signals for all the satellites. For GPS signals, generation of all its elements like the Navigation messages, C/A codes, frame and subframe structures should be defined and used in this project.
Keywords
- Bayo yen Tsui, J., Fundamentals of Global Positioning System Receivers- A Software Approach, John Wiley & Sons, 2007.
- Jiming, G., Wei, W. and Baichong, Ch., “Model of GPS IF Signal and Its Simulation”, GEO-spatial Information Science, 12, Issue 2, 2009, pp. 100-103.
- Dong, L., IF GPS Signal Simulator Development and Verification, University of Calgary,
- Yanhon, K., Dongksi,Y. and Qishan, Zh., “GPS Satellite Simulator Signal Estimation”, Journal of Electronic, 22, Issue 5 , 2005, pp 458-464.
- Corbell, P. M., Design and Validation of an Accurate GPS Signal and Receiver Truth Model for Comparing Advanced Receiver Processing Techniques, (Thesis for Master Degree), Department of Air Force University
- BK Precision Model 4070A User’s Manual.
- Misra, P. and Enge, P., Global Positioning System - Signals, Measurements, and Performance, Ganga-Jamuna Press, Massachusetts, 2001.
- Available, [on line]: http://navcen.uscg.gov/gps/ htm&http://cddis.gsfc.nasa.gov/gnss_datasum.html
- Available, [on line]: https://github.com/kristianpaul/ SoftGNSS
- Available, [on line]: http://plan.geomatics.ucalgary.ca
)