] Fester, D. A. and Bingham, P. E. “Main Tank Injection (MTI) Pressurization of Liquid Rocket Propellant Tanks,” 54th International Astronautical Congress of the International Astronautical Federation, Bremen, Germany, October 2003.
[2] CADY, E. C., “An Investigation of Fluorine- Hydrogen Main- Tank Injection Pressurization”, Journal of Spececraft, Vol. 6, No. 11, pp. 1248-1253, June 1969.
[3] Candy, E. C. and Kendle, D. W., “Vehicle- Scale Investigation of a Flurine- Hydrogen Main Tank Injection Pressurization System”, Journal of Spacecraft, Vol. 9, No. 3, pp. 158-164, September 1971.
[4] Prisnyakov, V. F. and Belyk, N. P., Dynamic of Liquid Propellant Rocket Engine, Mashinostroenie Publishing Co., 1969 (in Russian).
[5] Mushkin, E. K., Non-Stationary Operating Regime of Liquid Rocket Engine, Mashinostroenie Publishing Co., 1970 (in Russian).
[6] “Liquid Propellant Gas-Generators”, NASA Space Vehicle Design Criteria, March 1972.
[7] Kalesnikov, K. S., Pressurization Systems in Liquid Rocket Engines, Mashinostroenie Publishing Co., 1976 (in Russian).
[8] Folelsche, R. O. and Keen, J. M., “Nonequilibrium Combustion Model for Fuel-Rich Gas Generator,” Journal of Propulsion and Power, Vol.10, No.4, July-Aug 1994.
[9] Manski, D., “Cycles for Earth- to- Orbit Propulsion”, Journal of Propulsion and Power, Vol. 14, No. 5, pp. 558-604, September- October 1998.
[10] Paual Cesar Lozano- Tovar, “Dynamic Models for Liquid Rocket Engines with Health Monitoring Application”, June 1998, Available, [on line]: www.ssl.mit.edu.
[11] Majumdar, A. and Steadman, T. “Numerical Modeling of Pressurization of a Propellatnt Tank,” 37th Aerospace Science Meeting and Exhibit, Reno, Nv, 11-14 Jan, 1999.
[12] Belyaev, E. N., Chevanov, V. K. and Chervakov, V. V., Mathematical Model of Working Process in Liquid Rocket Engine, MAI Publishing Co, 1999, pp. 33-73 (in Russian).
[13]Adnani, P. and Jennings, R. W., “Pressurization Analysis of Cryogenic Propulsion Systems,” 36th AIAA/ASME/SAE/ASEE Joint Propulsion conference & Exhibit, Huntsville, 16-19 July, 2000.
[14] Nguyen, H. V. “Ground Pressurization by Helium Bubbling for Cryogenic Upper Stages”, AIAA-2001-3833, 2001.
[15] Naoumov, V. I. and Kriukov, V. G. “Modeling of Combustion and Flow in the Combustors of Rocket Gas-Generators”, 41st Aerospace Sciences Meeting and Exhibit, Reno, Nv, 6-9 January 2003.
[16] Sujeon, K. and Lee, J. W., “Optimal Gas Generator Design for the Liquid Rocket Engine”, 42nd AIAA Aerospace Science Meeting and Exhibit, Reno, Nevada, 5-8 January 2004.
[17] Takkwon, S. and Lee, Ch., “Development of Fuel Rich Gas Generator for 10 tonf Liquid Rocket Engine,” 40th AIAA/ASME/SAE/ASEE Joint Propulsion conference &Exhibit,Fort Lauderdale,Florida, 11-14 July 2004.
[18] Cai, G. and Tong, X., “Generic Optimization of System Parameters for Liquid Rocket Engine with Gas Generator Cycl,” 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Tuscon, Arizona 10-13 July 2005.
[19] Zilliac, G., “Modeling of Propellant Tank Pressurization”, 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Tuscon, Arizona, 10-13 July 2005.
[20] Azad, R., “Blow System and Discharge of Gas of Fuel Tank,” PazhoheshYar Journal, No. 10, Tehran, 2003, pp. 49-55 (In Persian).
[21] Shahani, A. R, “Designing of Pressurize Systems in Rocket,” Aerospace Industrial Organizationof Iran, Technical Report, 1997 (In Persian).
[22] Mazaheri, K., Khosravi, E. and Baqeri, I., “Simulation of Transient Regime of Gas Generator of Liquid Rocket Engine”, the 1st Conference of Iranian Aero-Space Society, Tehran, 2000 (In Persian).
[23] Abasi, A., Montazerin, E. and Baqeri, I., “Numerical Solution of Heat Transfer in Gas Generator of Liquid Rocket Engine,” (M.Sc. Thesis), A. K Technical University, Tehran, Iran, 2001 (In Persian).
[24] Mohseni M,karimi H. “Design and Thermodynamics Analysis of Liquid Rocket Propulsion Tank Pressurize Systems,” (M.Sc. Thesis), KNTU Faculty of Aerospace, Tehran, Iran, 2005 (In Persian).
[25] Mohseni, M. and Karimi, H., “Design and Thermodynamics Analysis of A Liquid Rocket Propulsion Tank Pressurize Systems,” the 13rd Conference of Iranian Mechanical Engineering Society, IUT Isfahan, 2006 (In Persian).
[26] Mohseni, M. and Karimi, H., “Designing of a Liquid Rocket Propulsion Tank Pressurize Systems", (M.Sc. cong.), KNTU Faculty of Mechanic, Tehran, Iran, 2004 (In Persian).
[27] Qanad, M. and Karimi, H., “Introduction of Types of Pressurizing Systems and their Performance,” the 14st Conference of Iranian Mechanical Engineering Society, IUT Isfahan, 2006 (In Persian).
[28] Najafi, M. and karimi, H., “Coupling of Mathematical Modeling and Simulation of Liquid Rocket Engine with Gas generator Pressurizing System,” (M. Sc. Thesis), KNTU Faculty of Aerospace, Tehran, Iran, 2009 (In Persian).
[29] Heidari, M. R., Ramesh, D. and Ali Mohamady, H. R. “Mathematical Modeling and Simulation of Non-Linear and Dynamical Special Space Propulsion System,” (M. Sc. Thesis), M. A Technical University, Tehran, Iran, 2011 (In Persian).
[30] Ali Mohamady, H. R., Ramesh, D., Heidari, R., Farrokhi, R. and Karimi, H., “Study of Liquid Propellant Engine & Hot Pressurizing System Interaction by Dynamical Simulation”, Journal of Space Science and Technology, Vol.14, No.1, Spring, 2013 (In Persian).
[31] Zanj, A., “Hot Pressurizing System with Liquid Propellant Enginesinteraction.” Technical Report, 2007 (In Persian).
[32] Ramesh, D. and Farrokhi, R., “Optimization of Start Transient Regime of Liquid Propellant Engines,” the 16st Conference of Iranian Mechanical Engineering Society, Kerman, 2009 (In Persian).
[33] Ramesh, D. and Farrokhi, R., “Non-Linear & Dynamical Simulation of 4C.C Liquid Propellant Engines,” the 15th Conference of Iranian Mechanical Engineering Society, Tehran, 2009 (In Persian).
[34] Beliaev, E., Chevanov, V. and Chervakov, V., “Mathematical Modeling of Operating Process of Liquid Propellant Rocket Engines,” MAI, 1999, (In Russian).
[35] Binder, M., “RL10-3-3A Rocket Engine Modeling Project,” NASA Technical Memorandum 107318, 1997.
[36] Ramesh, D. and Aminpoor, M., “Nonlinear Dynamic Simulation of an Open-Cycle Liquid Propellant Engine,” AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Cincinnati Duke Energy Convention Center, Cincinnati, OH, 2007.