Authors

Abstract

To improve the performance of satellite antennas, use of a high-impedance surface is purposed. High impedance surfaces are known as artificial magnetic conductors. The designed magnetic conductor includes an array of a Jerusalem Cross frequency selective surface which is connected to the ground via four pins. All conducting parts are made of Aluminum.The dielectric is Arlon AD 270 that fills the space between the ground and the JC frequency selective surface. The dielectric is made of fiberglass reinforced by Poly-tetrafluorethylene (PTFE). In 4.73GHz and 7.43GHz, structure operatesas a magnetic conductor.Using computer simulations, this structure is compared with a widely used artificial magnetic conductor. Aluminum and polymer chain of Carbon and Fluorine are composed of light elements, therefore using this material in antenna structure not only can improve specification of antenna but also can reduce cosmic ray effects.

Keywords

  1. Balanis, C. A., Antenna Theory: Analysis and Desingn, 3rd Edition, Wiely Interscience, 2005.
  2. Pozar, D.M., Microwave Enginnering, 3rd Edition, John Wiley and Sons, 2005.
  3. Hosseinipanah, M., Design of Artificial Magnetic Conductors, (Ph.D. Thesis), Harbin Institute of Technology, Dept. Astronomy, Harbin, China, Magetic Fields and Microwave Technology, 2010.
  4. Sievenpiper, D., Zhang, L. J., Broas, R. F. J., Alexopolous, N. G. and Yablonovitch, E., “High-Impedance Electromagnetic Surfaces with a Forbidden Frequency Band,” IEEE Transactions on Microwave Theory and Techniques, Vol. 47, No. 1, 1999, pp. 2059-2074.
  5. Sievenpiper, D., High-Impedance Electromagnetic Surfaces. (Ph.D. Thesis), Deptartment Electronic Engineering, University of California at Los Angeles, Los Angeles, CA, 1999.
  6. “Space Engineering Methods for the Calculation of Radiation Received and its Effects, and a Policy for Design Margins,” European Cooperation for Space Standardization, ECSS-E-10-12 Draft 0.11, 2005.
  7. J., Lail, D., Martin. C. and Nguyen, P., “Initial Report on Radiation Shielding for a Lunar Base,” United State NASA, February 28, 2011.