[1] Valizadeh, E., Montazeri, M.J., Ashkuri, M.R. and Dadkhah, M., “Scenario of Optimization of a Special Liquid Rocket Engine Combustion Chamber Energizing and Mass Parameters and it’s Hot-Fire Test”, 8th Iranian Aerospace Society Annual Conference, Tehran, 2009, (In Persian).
[2] Mehrabi, A., Ommi, F. and Movahednejad, E., “Design of a Liquid Subscale Engine with Single Injector for Swirl Double Base Injector Hot Test”, 1st Satellite Lunching Systems Meeting, Tehran, 2011, (In Persian).
[3] Ommi, F., Design Principals of Aerospace Engines & Propulsion, Besat Publications, Tehran, 2000, (In Persian).
[4] Karegar, A., “A Model for Optimized Locating of Injectors in Injector Plate by Cold Tests Results (A Thesis for the Degree of Master of Science in Aerospace Engineering)”, Tarbiat Modares University, Tehran, 2007, (In Persian).
[5] Ellerbrock, H. and Ziegenhagen, S., “Liquid Rocket Test Facility Engineering Challenges”, Acta Astronautica, Vol. 59, 2006, pp. 1123–1134،
[6] Burick, R.J., “Space Storable Propellant Performance Program Coaxial Injector Characterization”, NASA-CR-120936, 1972.
[7] Micci, M. M., Thomas, J.-L. and Glogowski, M., “Shear Coaxial Injector Spray Combustion Expriments,” 32nd JANNAF Combustion Meeting, Huntsville, Alabama, October 23-27, 1995.
[8] Immich, H. and Mayer, W., “Cryogenic Liquid Rocket Engine Technology Developments within the German National Tecnology Program,” paper AIAA-97-2822, 33rd Joint Propulsion Conference, Seattle, WA, 1997.
[9] Ommi, O., Burkalsof, Sokhof, “Research About Spray Characteristics in Injector Plate of a Liquid Micromotor,” Journal of Moscow Technical University, Moscow, 1996, (In Russian).
[10] Zinner, W. and et.al., “Development of Advanced Technologies for Future Cryogenic Thrust Chamber Applications,” AIAA Paper 1997, 1997-3312.
[11] Moosavi, S. A., “Liquid-Liquid Double Base Injector Design (A Thesis for the Degree of Master of Science in Aerospace Engineering)”, Tarbiat Modares University, Tehran, 2008. (In Persian).
[12] Ommi, F., Movahednejad, E., Kargar, A., “Experimental Investigation of Characteristics of a Double-Base Swirl Injector in a Liquid Rocket Propellant Engine,” Leonardo Journal of Sciences, 2009, pp. 92-111.
[13] Montazeri, M.J. and Valizadeh, E., “Presentation of a New Method for Combustion Chamber Design for a Liquid Rocket Engine and it’s Experimental Test,” 2nd Iranian Combustion Society Conference, Mash’had, 2009, (In Persian).
[14] Krishnan, S., Ahn Sang-Hee. and Lee Choong-Won., ‘‘Design and Development of a Hydrogen-Peroxide Rocket-Engine Facility,’’ Jurnal Mekanikal, Vol. 30, 2010, pp. 24 – 36,
[15] Leroy, J. Krzycki, ‘‘How to Design Build and Test Small Liquid Fuel Rocket Engine,’’ China Lake, California, Second Edition ,1971.
Mehrabi, A., “Design and Manufacturing of Subscale Engine with Single Double Base Injector and Its Combustion Model Investigation(A Thesis for the Degree of Master of Science in Aerospace Engineering)”, Tarbiat Modares University, Tehran, 2012 (In Persian).
)