[1] Yang, A.S., “Satellite Hydrazine Propulsion System Design Trades”, Journal of Da-Yeh University, 10, 2001, pp. 41-50.
[2] Meibody, M.N.P., Naseh, H. and Ommi, F., Hydrazine Monopropellant Catalyst Bed Optimization Methodology, the 16th International Conference of Iranian Aerospace Society, Tehran, 21-23 Feb 2017.
[3] Birbara, P.J. and Conn, W.L., Catalyst for Hydrazine Decomposition and the Method of Producing the Catalyst, US Patent 4324819, 1980.
[4] Soares Netoa, T.G., Cobob, A.J.G. and Cruz, G.M., “Evolution of Morphologic Properties on the Preparation of Ir/Al2O3 Catalysts with High Metallic Contents,” Applied Surface Science, Vol. 240, 2005, pp. 355–365.
[5] Armstrong,W.E., Ryland, L.B. and Voge, H.H., Catalyst for hydrazine decomposition and method for preparing such catalyst, US Patent 4124538, 1978.
[6] Bayvel, L. and Orzechovski, Z., Liquid Atomization, Taylor &Francis, 1993.
[7] Birbara, P.J., Conn and W.L., Catalyst for Hydrazine Decomposition and the Method of Producing the Catalyst, US Patent 4324819, 1980.
[8] Kim, J.H., Jung, H. and Kim, J.S., “Effects of Characteristic Length Variation for Thrust Chamber on the Hot-fire Performance of Hydrazine Thruster”, Journal of The Korean Society for Aeronautical and Space Sciences, Vol. 42, No. 2, 2014, 144-149.
[9] Available, [on line]: http://www.space-propulsion.com/ spacecraft-propulsion/hydrazine-thrusters/20n-hydrazine-thruster.html
[10] Available, [on line]: http://www.moog.com/content/ dam/moog/literature/Space_Defense/Spacecraft/Monopropellant_Thrusters_Rev_0613.pdf
[11] Meyers, J.M., “Rocket Propulsion-Nozzle Thermodynamics and Isentropic Flow Relations,” Pamphlet in university of Vermont (http://www. academia.edu/29771019/ME_239_ Rocket _Propulsion_ Nozzle_Thermodynamics_ and_ Isentropic_Flow_Relations).
[12] Kuensberg Sarre, C., Kong, S.C. and Reitz, R.D. Modeling the Effects of Injector Nozzle Geometry on Diesel Sprays, SAE International, SAE paper, 1999
[13] Buelow, Ph., Mao, E. O. Ch., Smith, S. and Bretz, D., “Two-phase Computational Fluid Dynamics Analysis Applied to Prefilming Pure-Airblast Atomizer,” Journal of Propulsion and Power, 19, 2003, pp. 235-241.
[14] El-Sayed Negeed, R., Hidaka, S., Kohno, M. and Takata, Y. “Experimental and Analytical Investigation of Liquid Sheet Breakup Characteristics”, International Journal of Heat and Fluid Flow, 32, 2011, pp. 95–106.
[15] Hosseinalipour, S.M., Karimaei, H. and Ommi, F., “Numerical Study the Effect of Mass flow Rate on Liquid Sheet Properties Resulting from as Wirlinjector”, 3nd Proceeding of Gasturbine, Iran University of Science and Technology, May 2014, Tehran, 13–15 (in Persian).
[16] Hosseinalipour, S. M. and Karimaei, H., “A New Model Based on Coupling of MEP/CFD/ILIA for Prediction of Primary Atomization”, Canadian Journal of Chemical Engineering, 94, 2016, pp. 792-802.
[17] Hosseinalipour, S. M. and Karimaei, H., Movahednejad E., Ommi, F., “Application of Maximum Entropy Principle for Estimation of Droplet-Size Distribution Using Internal Flow Analysis of a Swirl Injector”, International Journal of Spray and Combustion Dynamic, 8, 2016, pp. 205-216.
[18] Karimaei H., “Design and Simulation of Fuel Injector of a 10N Monopropellant Hydrazine Thruster”, Journal of Space Science and Technology, 10, 2018, pp. 59-65 (in Persian).
[19] Mark Ventura, P., Wernimont, E., Heister, S. and Steve Yuan, P., "Rocket Grade Hydrogen Peroxide (RGHP) for use in Propulsion and Power Devices-Historical Discussion of Hazards," 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2007.
[20] Chiappetta, L., Spadaccini, L., Huang, H., Watkins, W. and Crocker, A., "Modeling a Hydrogen Peroxide Gas Generator for Rockets," 36th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, vol. 3223, 2000, pp. 17-19.
[21] Corpening, J., Heister, S.D., Anderson, W. and Austin, B., “Thermal Decomposition of Hydrogen Peroxide, Part 2: Modeling Studies,” Journal of Propulsion and Power, Vol. 22, No. 5, 2006, pp. 996-1005.
[22] Heister, S., Anderson, W., Corpening, J. and Austin, B., “A Model for Thermal Decomposition of Hydrogen Peroxide," Purdue Univ Lafayette in School of Aeronautics and Astronautics, 2004.
[23] Pasini, A., Torre, L., Romeo, L. and d’Agostino, L., "Performance Modeling and Analysis of H2O2 Catalytic Pellet Reactors," 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Vol. 5025, 2008, p. 2008.
[24] Ghassemi, H.M. and Asghari, I., M. N.P., "Experimental Investigation on Specific velocity of Hydrogenperoxid Monopropellant Thruster," 11th Iranian Aerospace Society Conference, Tehran, Iran, March 1-3, 2011.
[25] V, Shankar and K. Anantha Ram, “Experimental Investigations of the 10 N catalytic Hydrazine Thruster”, Acta Astronautica, 12, 1985, pp. 237-249.
[26] Ommi., F., “Space Propulsion and Rocket”, Besat Publication, 2009 (in persian).
[27]
Kim, S.K., Jang, Shin,
I.J.,
Shin,
H.S., Kim, N.R.,Yu, S.H. and Choa,
M. J. S. J. “Macroporous–Mesoporous Alumina Supported Iridium Catalyst for Hydrazine Decomposition”,
Catalysis Today,
Vol. 185, , PP. 198-204.
[28] Birbara, P.J. and Conn, W.L., Catalyst for Hydrazine Decomposition and the Method of Producing the Catalyst, US Patent 4324819, 1980.