[1] R. Varvill and A. Bond, "A comparison of propulsion concepts for SSTO reusable launchers," Journal-British Interplanetary Society, vol. 56, no. 3/4, pp. 108-117, 2003.
[2] M. Mirshams , H. Naseh, Space Launch System Conceptual Design, K. N. Toosi University of Technology Publisher, Book under review, 2020 (in Persian).
[3] U. Olsson, "Aerospace Propulsion from Insects to Spaceflight," published Heat and Power Technology, KTH, Stockholm, Sweden, 2nd Edition, p. 17, April 2012.
[4] T. Tomita, N. Kumada, and A. Ogawara, "A conceptual system design study for a linear aerospike engine applied to a future SSTO vehicle," in 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Nashville, TN, 2010, p. 7060.
[5] C.-H. Wang, Y. Liu, and L.-Z. Qin, "Aerospike nozzle contour design and its performance validation," Acta Astronautica, vol. 64, no. 11-12, pp. 1264-1275, 2009.
[6] K. N. Kumar, M. Gopalsamy, D. Antony, R. Krishnaraj, and C. B. Viswanadh, "Design and Optimization of Aerospike nozzle using CFD," in IOP conference series: materials science and engineering, vol. 247, no. 1: IOP Publishing, p. 012008, 2017
[7] K. Schlee, S. Gangadharan, J. Ristow, J. Sudermann, C. Walker, and C. Hubert, "Advanced method to estimate fuel slosh simulation parameters," in 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2005, p. 3596.
[8] M. He, L. Qin, and Y. Liu, "Numerical investigation of flow separation behavior in an over-expanded annular conical aerospike nozzle," Chinese Journal of Aeronautics, vol. 28, no. 4, pp. 983-1002, 2015.
[9] Q. Xiao, H.-M. Tsai, and D. Papamoschou, "Numerical investigation of supersonic nozzle flow separation," AIAA journal, vol. 45, no. 3, pp. 532-541, 2007.
[10] A. Gross and C. Weiland, "Numerical simulation of separated cold gas nozzle flows," Journal of propulsion and power, vol. 20, no. 3, pp. 509-519, 2004.
[11] A.-S. Mouronval and A. Hadjadj, "Numerical study of the starting process in a supersonic nozzle," Journal of propulsion and power, vol. 21, no. 2, pp. 374-378, 2005.
[12] N. Jourdaine, N. Tsuboi, K. Ozawa, T. Kojima, and A. K. Hayashi, "Three-dimensional numerical thrust performance analysis of hydrogen fuel mixture rotating detonation engine with aerospike nozzle," Proceedings of the Combustion Institute, vol. 37, no. 3, pp. 3443-3451, 2019.
[13] E. L. Lash, "Trajectory analysis and comparison of a linear aerospike nozzle to a conventional bell nozzle for SSTO flight" , (Master’s Thesis), University of Tennessee, 2015.
[14] H. Naseh and A. Alipour, "Propellant management device (PMD) design optimization of hydrazine fuel tank," Modares Mechanical Engineering, vol. 17, no. 7, pp. 152-160, 2017.
[15] A. Alipour, "Propellant Management Device (PMD) System Design Methodology in Zero Gravity Condition," Modares Mechanical Engineering, vol. 18, no. 2, pp. 84-94, 2018.
[16] H. Naseh, A. Alipour, and P. Daneshgar, "Modeling and Simulation of Fuel Sloshing in Tank by Pendulum Model," Modares Mechanical Engineering, vol. 19, no. 8, pp. 2001-2011, 2019.
[17] C. Lee and D. Thompson, "Computation of plug nozzle contours by the Rao’s optimum thrust method," NASA CR-21914 R-61, 1963.