[1] R. O. Hayre, S.W. Cha, W. F. Collela, B. Prinz, Fuel cell fundamentals, 3rd Edition, John Wiley & Sons, New York, USA, 2016.
[2] Y. Wang, K. Chen, J. Mishler, S. Chan Cho, X.A. Cordobes Adroher, review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research.
J. Applied Energy, vol. 88, no. 4, pp. 981-1007, 2011.
[3] M.F. Mathias, J. Roth, Diffusion media materials and characterization. Handbook of fuel cell technology fundamentals, technology and applications, John Wiley & Sons, New York, 2010.
[4] D. M. Bernardi and M. W. Verbrugge, Mathematical model of a gas diffusion electrode bonded to a polymer electrolyte, AIChe Journal, vol. 37, pp. 1151-1163, 1991.
[5] R. Boddu, U. K. Marupakula, B. Summers, P. Majumdar, Development of bipolar plates with different flow channel configurations for fuel cells, Journal of Power Sources. vol. 182, no. 2, 1083-1092, 2009.
[6] X. D. Wanga, X. X. Zhanga, W. M. Yanb, D. J. Leec, A. Sud, Determination of the optimal active area for proton exchange membrane fuel cells with parallel, interdigitated or serpentine designs, international journal of hydrogen energy, vol. 34, no. 9, pp. 3823-3829, 2009.
[7] S. M. Baek, D. H. Jeon, J. H. Nam and C. J. Kim, Pressure drop and flow distribution characteristics of single and parallel serpentine flow fields for polymer electrolyte membrane fuel cells, Journal of Mechanical Science and Technology. 26 (9) (2012),2995-3006.
[8] S. Um, C. Y. Wang, and K. S. Chen, “Computational fluid dynamics modeling of proton exchange membrane fuel cell,” Journal of the Electrochemical society, vol. 147 no. 12, pp. 4485-4493, 2000.
[9] J. P. Owejan, T. A. Trabold, D. L. Jacobson, M. Arif, S. G. Kandlikar, “Effects of flow field and diffusion layer properties on water accumulation in a PEM fuel cell,” International Journal of Hydrogen Energy, vol. 32, pp. 4489 – 4502, 2007.
[10] Z. M. Wan, J. H. Wan, J. Liu, “Water recovery and air humidification by condensing the moisture in the outlet gas of a proton exchange membrane fuel cell stack,” Applied Thermal Engineering, Vol. 42, pp. 173-178, 2012.
[11] S. Rowshanzamir, M. H. Eikani, M. Khoshnoodi and T. Eshagh Nimvar, “A Parametric Study of the PEM Fuel cell Cathode,” International journal of Engineering Science (IUST), vol. 19, no. 5-2, pp. 73-81, 2008.
[12] L.K. Kwac and H.G. Kim, “Investigation of gas flow characteristics in proton exchange membrane fuel cell,” Journal of Mechanical Science and Technology, vol. 22, pp.1561-1567, 2008.
[13] M. Ameri, P. Oroojie, “Two Dimensional PEM Fuel cell Modeling at different Operation Voltages,” World Renewable Energy Congress, Sweden, 2011.
[14] X. Zhang, A. Higier, Xu. Zhang and H. Liu, “Experimental Studies of Effect of Land Width in PEM Fuel Cells with Serpentine Flow Field and Carbon Cloth,” Energies, pp. 471-481, 2019.
[15] N. Ahmadi, S. Rezazadeh, A. Dalvand and I. Mirzaee, “Study of effect of gas channels geometry on the performance of poly polymer electrolyte membrane fuel cell,” Periodical Polytechnic Chemical Engineering, vol. 62, no. 1, pp. 97-105, 2018.
[16] M. Muthukumar, P. Karthikeyau, M. Vairavel, C. Loganathan, S. Praveen kumar and A.P. Sentil kumar, “Numerical Studies on PEM Fuel Cell with Different Landing to Channel Width of Flow Channel,” Science Direct, Procedia Engineering, vol. 97, pp. 1534-1542, 2014.
[17] H. Liu, P. Lia, K. Wang, “Optimization of pem fuel cell flow channel dimensions, Mathematic modeling analysis and experimental verification,” International Journal of Hydrogen, Energy, vol. 38, pp. 9835-9846, 2013.
[18]V. Lakshminarayanan and P. Karthikeygan, “Optimization of Flow Channel Design and Operation Parameters on Proton Exchange Membrane Fuel Cell Using Matlab,” Periodical Polytechnic Chemical Engineering, vol. 60, no. 3, pp. 173-180, 2016.
[19] R. Hadjadj and W. Kaabar, “Numerical Investigation of Flow Field in Proton Exchange Membrane Fuel Cell at Different Channel Geometries,” Journal of Engineering Science and Technology, vol.13, no. 4, pp. 1070-1089, 2018
[20] COMSOL AB, Comsol Metaphysics Manual, Ver.3.3: The proton exchange membrane fuel cell, Burlington, MA, USA, 2006.
[21] P. Mondal and Md. A. AL Ahad, “Analysis of Electro-Thermal Characteristics of a Conductive Layer with Cracks and Holes, Global,” Journal of Researches in Engineering Mechanical and Mechanics Engineering, vol. 14, no.1, 2014.